US
6
Listening with a Headphone
■ Plug the headphone mini-plug into the headphone jack located on the front side of the set.
MENU
HEAD
PHONE
—
Removing and mounting the back cover
• When mounting the cover, clamp the cords using the included
cord holders (cable clamps) so that they do not get caught.
• Stick the two cable clamps near the CONTROL terminal and
the DC input terminal, then insert cables into the main unit.
Clamping the connection cords
Preparation
■ Removal
• Remove the back cover when inserting the cords into the terminals.
• To remove the back cover, gently pull the part marked
forward.
■ Mounting
• Insert the four hooks (1 ) into the cabinet.
• Making the back cover bulge forward, insert the four hooks (2) into
the cabinet.
• Press on the marked parts (3) until the two hooks on the bottom of
the cover are locked in place with a click.
2
2
1
3
Example of Application
Cable Clamp
The headphone is not included in the supplied accessories.
