37
INITIAL SETTINGS
2
SETTING UP THE MACHINE FOR USE WITH A PC MODEM
The machine is set for not detecting automatically the fax tone when you pick up an extension telephone. However,
you can activate this function by following the procedure below.
1
Press the [MENU] key.
2
Press the [ ] key ( ) or [ ] key ( )
until "4:USER PROGRAM" appears,
and then press the [OK] key.
3
Press the [ ] key ( ) or [ ] key ( )
until "15:FAX SIGNAL RCV" appears,
and then press the [OK] key.
4
Press the [ ] key ( ) or [ ] key ( )
to select "1:ON" or "2:OFF".
5
Press the [OK] key.
6
Press the [MENU] key.
Press the [MENU] key to
exit.
If you are using a modem on the same line, do not activate this function, otherwise the machine will mistakenly
attempt to receive the transmission from your computer.
Warning
"4:USER PROGRAM"
Selection
"15:FAX SIGNAL RCV"
Selection
