12
Dimension: 140mm x 215mm
Antenna Setup DIGITAL (Continued)
H CHANNEL STRENGTH
Make sure the signal strength of each channel received is finely adjusted.
(i) Press CH a/s to select “CHANNEL STRENGTH”.
(ii) Input channel number (2–69) using REMOTE KEYPAD
(0–9) button.
(iii) Adjust the direction of the antenna to obtain the signal
strength level 60 or higher.
Note:
• This function is available for DIGITAL channel only.
6 Press MENU to exit.
CHANNEL STRENGTH
SIGNAL STRENGTH
Signal Test
Input channel number (2-69)
Signal Strength
CH
Current 70 Max 80
--
ANTENNA SETUP DIGITAL
Accessing the MAIN MENU screen without Remote Control
• If you misplaced your Remote Control you can still access most settings
via the MAIN MENU screen by pressing MENU on the TV set.
• Some features of your TV set are not accessible without the Remote
Control. If you lost your Remote Control, contact a Sharp Service Center
for a replacement.
(On the Set)
MENU button
CH
CH
→
321
654
987
0
Channel Call
•
To display receiving channel information.
1 Press DISPLAY once. The display appears as shown on right.
• If the viewing channel is a digital channel, the information of channel number, audio service type,
broadcast station, program information and V-Chip rating will appear.
2 Press DISPLAY twice. The timer information screen will appear.
3 Press DISPLAY again to return to normal screen.
AUDIO: ENGLISH
10.1
DIGITAL
NBC
NONE
SPORTS
(while viewing digital channel)
01
STEREO
SAP
ON
ON
AIR
ANALOG
DLSVTV-PG
ID014:3
AIR
MONO
(while viewing analog channel)
SLEEP TIMER
120M REMAIN
VIEWING TIME
00M10H REMAIN
DISPLA
DISPLA
DISPLA
27SF560(10-12).p65 26/10/05, 5:35 PM12
