Servis-Rhino TURBO120 Manual

A SERVICE OF

next previous

ASSEMBLY

Turbo120 01/11 Assembly Section 3-8

© 2011 Alamo Group Inc.

ASSEMBLY

FRONT AND REAR DEFLECTORS (Standard Equip.) CHAINGUARDS

(Optional Equip. at Extra Cost)

CHAINGUARDS: Front and Rear Chainguards (Optional Equipment) are recommended for higher than normal

usage (100 hours or more per year) and will provide protection from thrown objects with careful operation.

Chainguards must be maintained in good repair by replacing missing or worn sections or by being replaced

when seriously worn or damaged. Figure Asm-R-0295 & Asm-R-0296.

Front Chainguard - (FIGURE Asm-R-0295)

Attach the right and left Chainguard

assemblies (1) to the mower with 1/2” x 1-1/4”

bolts(2), Lockwashers (4), and Flatwashers

(3). Then attach Chainguard Brackets, left (10)

and right (9) to mower with 1/2” x 1-1/4” Bolts

(2). Flatwashers (3), and Locknuts (4). Fasten

the chain links (5) and (6) to the guards by

inserting the rod (8) through the links and

retaining them with cable stop (7).

Rear Chainguard- (FIGURE Asm-R-0296)

Attach the right and left Chainguard assemblies

91) to the mower with 1/2” x 1-1/4” Bolts (2),

Flatwashers (3), and Locknuts (4). Fasten the

chain links (5) to the guard by inserting the rod

(6) through the links and bending the ends.