25
BASIC OPERATION
When connect component video output (Cr, Y, Cb or Pr, Y, Pb) from
video equipment to R/Pr, G/Y and B/Pb jacks.
WHEN SELECT INPUT 2 (5 BNC TERMINAL)
WHEN SELECT INPUT 1 (SDI TERMINAL )
Input 1
INPUT MENU
SELECTING INPUT SOURCE
MENU OPERATION
DIRECT OPERATION
Select INPUT source by pressing INPUT 1/2 and INPUT 3/4
buttons on Side Control or INPUT 1, INPUT 2, INPUT 3 and
INPUT 4 on Remote Control Unit.
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to select Input and press SELECT
button.
Another dialog box INPUT SELECT
Menu will appear.
Press POINT DOWN button and a red-arrow icon will appear.
Move arrow to INPUT source that you want to select, and then
press SELECT button.
1
2
INPUT 1/2 button
INPUT 1
INPUT 2
Input 2
INPUT 3/4 button
INPUT 3
INPUT 4
INPUT 1-4 buttons
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT Menu icon
Move arrow to INPUT source
that you want to select, and
then press SELECT button.
WHEN SELECT INPUT 3 (DVI TERMINAL)
