Sanyo PLC-ZM5000L Manual

A SERVICE OF

next previous

Shutter function is available to block out light to the screen,

so that the screen can be used for the other presenters.

Prohibit the shutter operation from the remote control

and the projector's side control.

…………… Permit the shutter operation from

both the remote control and the

projector's side control.

…………… Prohibit the shutter operation from

the remote control.

…………… Prohibit the shutter operation from

the side control.

…………… Prohibit the shutter operation from

both the remote control and the

projector's side control.

Protection

The Shutter Management function turns off the projection

lamp when the projector is left with the shutter closed

and the set time has passed away. The count-down time

can be set between 5 and 480 minutes. When the count-

down time has elapsed, the shutter will be opened up

automatically and the lamp will be turned off to cool itself

down. The SHUTTER indicator is blinking blue during

this cooling-off period. When the lamp has been fully

cooled down, the POWER indicator turns green lighting

and the SHUTTER indicator keeps blinking. Should the

ON / STAND-BY button be pressed in this condition,

the projection lamp will be turned on and the SHUTTER

indicator turns off.

Note:

  TheShutterManagementfunctioncannotbehalted.

Setting

Shutter

Shutter

Management

Release key

By using the Release function from the following options, the

Shutter can be released when it stays activated (i.e. when it

is closed. )

Any …… By pressing any button on the projector's side

control or the remote control, the shutter can be

released when it is closed, and meanwhile the

function of the selected item will come into effect.

 *IftheMUTEbuttonontheremotecontrolispressedwhen

theshutterisclosed,onlytheshutterwillbereleased.

SHUTTER… Only by pressing the SHUTTER button on the

projector’s side control or the remote control

the shutter can be released when it is closed.

In addition, when the Shutter is functioning, only the

following buttons are active:

-- INPUT button and ON/STAND-BY button on the

projector’s side control

-- INPUT 1/2/3 buttons and STAND-BY button on the

remote control

Note:

 When theshutter isclosed, ifthe

projectoris turnedoffand on,the

shutterwillbereleased.

63