A SERVICE OF

logo

Open as PDF
next previous
-8-
■ Mechanical Disassemblies
Mechanical disassemble should be made following procedures in numerical order.
Following steps show the basic procedures, therefore unnecessary step may be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original otherwise it may cause loss of
performance and product safety.
1 Remove 4 screws A (M3x6) to take the Cabinet Top Ass’y upward off.
2 Remove the Control Panel off from the Cabinet Top by lifting the edge of
control panel.
Fig.1
1 Remove 8 screws (M3x6) to take the Main Board upward off.
Fig.2
z Cabinet Top and Control Panel removal
x Main Board removal
A
A
A
A
Main Board
Control panel
Cabinet top
Screws Expression
(Type Diameter x Length) mm
T type M Type