A SERVICE OF

logo

Open as PDF
next previous
40
Video Input
ChooseComputer 1(Component) orComputer 1(Scart)bypressingtheINPUTbuttononthetopcontrolor
presstheCOMPUTERbuttonontheremotecontrol.
Before using thesebuttons, correct inputsource shouldbe selected through Menuoperationasdescribed
below.
1
Input Menu
2
UsethePoint▲▼buttonstoselectComputer 1and
thenpressthePoint►button.
Input Source Selection (Component, RGB Scart 21-pin)
Whentheinputsourceiscomingfromvideo
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a
Component-VGACable,selectComponent.
Component
Whentheinputsourceiscomingfromvideo
equipment connected to the COMPUTER
IN1/COMPONENTINterminalwithaScart-
VGACable,selectRGB (Scart).
RGB (Scart)
Direct Operation
Menu Operation
Press the MENU button to display the On-Screen
Menu.UsethePoint▲▼buttonstoselectInputand
thenpressthePoint►orSELECTbutton.
Note:
•Network is for the Network function. See owner’s
manual“NetworkSet-upandOperation”.
•WhentheInputSearchfunctionissettoOn1orOn2,
theinputsignalwillbesearchedautomatically(p.47).
COMPUTER button
Top Control
INPUT button
Remote Control
3
UsethePoint▲▼buttonstoselectComponentor
RGB(Scart) andthenpresstheSELECTbutton.
Computer 1
Video
S-video
Computer 2
Computer 1
Computer 2
Network