The SNMP agent provided with this projector is based upon MIB-2 defined by RFC1213. For private
MIB information, refer to file "Mibinfo/XUPjNet.mib" in the CD-ROM.
SNMP setting
This projector provides a SNMP (Simple Network Management Protocol)
agent function. The SNMP consists of a manager and agents. The group
which communicates information each other with SNMP is called
"Community". There are two access modes in a community, Refer (read only) and Set (read-
write). This projector allows to use Refer (read only) only. The SNMP message informs the pro-
jector status called "Trap" to an administrator. Click
SNMP Setting
on the main menu and
set up each item.
Item........................................Description
Contact...............................................Ent
er user name of the projector etc. (optional)
Place.....................................................Enter place of the projector (optional)
Community name(refer).......Ent
er community name (read only). Default name is "public".
PJ information
SNMP setting
Item........................................Description
Community name......................Ent
er community name to send "Trap". Default name is "public".
Add address....................................Ent
er IP address of the SNMP manager computer to receive "Trap".
Trap
