27
Choose either Computer 1(RGB) or Computer 1(Scart) or Computer 2(Analog) by pressing the INPUT button
on the top control or press the COMPUTER 1 button or Computer 2 on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
1
Input Menu
2
3
Computer Input
COMPUTER 1 button
Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.45).
Computer
1
Top Control
Remote Control
Press the MENU button to display the On-Screen
Menu. Use the Point buttons to select Input and
then press the Point or the SELECT button.
Use the Point buttons to select Computer 1.
When Computer 1 is selected, press the Point
button to access the submenu items. Use the Point
buttons to select the RGB input source and then
press the SELECT button.
Computer 1(RGB)
Computer 1(Scart)
INPUT button
Video
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
S-video
Computer 1 ( RGB)
/(Component) / (Scart)
Computer 2 (PC digital)
Computer 2 (AV HDCP)
Computer 2 (Analog)
COMPUTER 2 button
Input Source Selection (RGB: Computer 1/Computer 2(Analog))
Direct Operation
Menu Operation
