Sanyo PLC-WXU300K Manual

A SERVICE OF

next previous

56

Key lock

Key lock

Security (Key lock and PIN code lock)

PIN code lock

This function locksthe topcontrol and remote control

buttonstopreventoperationbyunauthorizedpersons.

Select

Key lockandthenpresstheSELECTbutton,and

selectthedesireditembypressingthePoint▲▼buttons.

.....Unlocked.

.....Locktheoperationofthetopcontrol.To

unlock,usetheremotecontrol.

.....Locktheoperationoftheremotecontrol.

Tounlock,usethetopcontrol.

Ifthetopcontrolaccidentallybecomeslockedandyoudo

nothavetheremotecontrolnearbyorthereissomething

wrongwithyourremotecontrol,contactthedealerwhere

youpurchasedtheprojectorortheservicecenter.

ThisfunctionallowsyoutousetheKeylockandPINcode

lockfunctiontosetthesecurityfortheprojectoroperation.

Thisfunctionpreventstheprojectorfrombeingoperated

byunauthorizedpersonsandprovidesthefollowing

settingoptionsforsecurity.

 Off............Unlocked.

 On1..........Enter the PINcode every time turning on

theprojector.

 On2..........EnterthePINcodetooperatetheprojector

once the power cord is disconnected; as

long as theACpower cordis connected,

the projector can be operated without a

PINcode.

WheneveryouchangethePINcodelocksettingorthe

PIN code(the four-digit number),you arerequired to

enterthePINcode.The“1234” issetastheinitialPIN

codeatthefactory.

Ifyouwantto changethe PINcodelock setting,Press

the SELECT button and the PIN code dialog box

appears.

PIN code lock

Setting

When the projector islocked with the PIN code, the

Securityiconappearsontheguide.

Power management Off

On start Off