English - 15-
It is required to subscribe to a pay channel company
toviewthepaychannelsoftheDigitalTerrestrialbroad-
casting.
Obtain the ConditionalAccess Module (CAM) and the
Viewing card by subscribing to a pay channel com-
pany, then insert those to the Television using the
following procedure.
1. Switch off the TV and unplug from the mains.
2.Insert theCAM,thenViewing Cardto theslot thatis
located in the terminal cover at the left-hand side
of the TV (from front view).
• The CAM should be correctly inserted, it is impos-
sible to insert fully if reversed. The CAM or the TV
terminal may be damaged if the CAM is forcefully
inserted.
3. Connect the TV to the mains supply, switch
on and then wait for few moments until the
card is activated.
•SomeCAMsmayrequirethefollowingsetup.Please
set the CAM by entering the IDTV menu, Common
Interface then pressing the “OK(SELECT)” button.
(CAM set up menu is not displayed when it is not
required.)
• To see the viewing contract information:
Enter IDTV; press the “M” button, then highlight Com-
mon Interface and press the “OK(SELECT)” button.
• When no module is inserted, “No Common Inter-
face module detected” message appears on the
screen.
• Refer to the module instruction manual for details of
the settings.
Menu System
Picture Menu
Brightness 63
Sharpness 31
Colour Temp Normal
Noise Reduction Low
Film Mode Off
Store
Reset
PICTURE
NO SIGNAL
Mode
By pressing
/
button, select Mode. Press
/
button to choose from one of these options: Cinema,
Dynamic and Natural.
Contrast/Brightness/Sharpness/Colour/Hue
By pressing
/
button, select the desired Option.
Press
/
button to set the level.
Hint: Hue is displayed in picture menu when the TV
receives an NTSC signal.
ColourTemp
• By pressing
/
button select Colour Temp.
• Press
/
to choose from one of these options:
Cool, Normal and Warm.
NoiseReduction
By pressing
/
button select Noise Reduction.
Press
/
to choose from one of these options:
Low, Medium, High or Off.
FilmMode
Films are recorded at a different number offrames
per second to normal television programmes.
By pressing
/
button, select Film Mode.
Press
/
button to set this feature On or Off. Turn
this feature on when you are watchingfilms to see
the fast motion scenes clearly.
Store
• By pressing
/
button select Store.
• Press
or “OK” button to store the adjustments.
“Stored” will be displayed on the screen.
Reset
By pressing
/
button, select Reset.Press
/
or “OK” button to reset the picture modes to factory
default settings.
Sound Menu
Equalizer
Headphone
Sound Mode Mono
Dynamic Bass Off
3D Panaroma Off
Store
SOUND
01-ENG-42781W-MB26-UKIDTV-BSI-1050UK-(WSUB-ALO-ECOPIP)-SANYO-C2-10050046-50110543.p6510.07.2007, 12:5415
