34
GB
You can:
◆
stop the cassette at a given frame (image) ; and
◆
advance one frame at a time.
➢ No sound is heard when playing back frame by frame.
1 Press the PLAY ( ) button to start playing the cassette.
2 Press the P/Still button ( ) to stop the tape at a given frame.
3
Press the P/Still button ( ) again to advance forward frame by frame.
4 Instead of Step 3 you can also turn the JOG to the left or right to
advance frame by frame backward or forward.
5 To return to normal playback, press the PLAY ( ) button.
☛ If the Frame-by-Frame function is used for more than five
minutes (except for JOG function), the VCR will auto-
matically play to protect the cassette and video heads.
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example: You wish to analyze an athlete’s technique, movement
by movement.
The Shuttle function is available on the remote control.
➢ No sound is heard when playing a sequence at variable
speeds.
1 Press the PLAY ( ) button to start playing the cassette.
2 Turn the SHUTTLE RING to the left or right to vary the playback
speed.
3 Each time you turn the shuttle ring, the speed will change as
shown in the following illustration.
☛
When you activate Variable Speed play, there will be no
color in some modes. This is normal operation. Modes
with no color are shown below.
◆
No color modes : • Variable Speed play of LP recordings
on any system.
• X2 and Still/Slow play of SLP
recordings in PAL-M mode.
☛
If the picture is noisy or distorted during X2 play or other
variable speed play, adjust the tracking manually for a
cleaner picture.
Playing a Sequence at Variable Speeds
Playing a Sequence Frame by Frame
AUTO MENU
.
