66
Ringer Type
You can change the sounds that notify you of incoming voice
calls, voicemail notification, messages, data or fax calls, and
scheduled events under Ringer Type in the Sounds menu.
Change Ringer Type - Voice Calls
1. In standby mode, press for
Ringer Type.
2. Press to enter the Voice Calls sub menu.
3. Press for those calls With Caller ID or press
for those calls with No Caller ID.
4. Toggle left or right to select the ringer category
(Melodies, Downloaded, and Ring Tones).
Note: If you haven’t downloaded any melodies or ring
tones, the “Downloaded” category will be empty.
5. Toggle down once to select the Ringer.
6. Toggle left or right to play the available tones
or melodies.
7. When the desired tone or melody plays, press to
save the setting and exit to the previous menu.
Change Ringer Type - Messages
1. In standby mode, press for
Ringer Type.
2. Press for Messages
3. Toggle to select from Voicemail or Notification
(text messages) and press .
n400bmc version 2.book Page 66 Wednesday, May 14, 2003 3:30 PM
