Funbox
130
Security
: select a data transmission mode. Choose
Secure
to protect your data against unauthorised
access; otherwise, choose
Non-secure
.
Bearer
: select a bearer to be used for each type of
network address accessed;
GPRS
or
Data
.
The remaining options depend on the Bearer
setting.
When the bearer is set to
GPRS
:
IP address
: enter the WAP gateway address
required to connect to the Internet.
User name
: enter the user ID required to connect
to the GPRS network.
Password
: enter the password required to connect
to the GPRS network.
APN
: enter the access point name used for the
address of the GPRS network gateway.
When the bearer is set to
Data
:
IP address
: enter the WAP gateway address
required to connect to the Internet.
Login name
: enter the PPP server login ID.
Password
: enter the PPP server password.
Dial-up number
: enter the PPP server phone
number.
Data call type
: select a data call type;
Analogue
or
ISDN
.
Note
: The WAP browser settings may vary, depending
on the service provider. Contact your service
provider for further details.
