Changing Your Settings 122
Auto Retry
Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.
1. From the
Settings
menu, select
Call Settings
➔
Auto Retry
.
The following settings appear in the display:
•Off
— Disables automatic re-dialing of numbers
• Every 10 Seconds
— Phone automatically re-dials a number
every 10 seconds
• Every 30 Seconds
— Phone automatically re-dials a number
every 30 seconds
• Every 60 Seconds
— Phone automatically re-dials a number
every 60 seconds
2. Select the desired call automatic retrying method.
TTY Mode
Your phone is fully compatible with TTY equipment used by those
who are hearing impaired. TTY equipment is connected to your
phone through the power/accessory connector on the left side of
the phone. TTY Mode must be enabled before you can use your
phone with a TTY device.
1. From the
Settings
menu, select
Call Settings
➔
TTY Mode
.
You are prompted to confirm you want to change the
current TTY Mode setting.
Note:
The “
Enabling TTY may impair headset use and non-TTY accessory
performance
” message pops up when you select
TTY Mode
.
2. To access the TTY Mode settings, press the
Yes
soft key. To
return to the
Call Settings
sub-menu, press the
No
soft key.
3. If you press the
Yes
soft key, the following settings appear
in the display:
•TTY Full
— Enables TTY mode and disables microphone and
earpiece.
•TTY+Talk
— Enables TTY mode and microphone.
•TTY+Hear
— Enables TTY mode and earpiece.
•TTY Off
— Disables TTY mode.
4. Select the desired TTY Mode.
Note:
The TTY icon ( ) appears in the top of the display when the phone is
in standby mode.
Voice Privacy
Voice Privacy when enabled (that is, set to
Enhanced
), turns on
advanced voice encryption.
1. From the
Settings
menu, select
Call Settings
➔
Voice
Privacy.
The following settings appear in the display:
