Call functions
32
• Press for
Hard Pause
. The letter “P”
displays, meaning that a hard pause will
occur at that point in the dialing sequence.
• Press for
2sec Pause
. The letter “T”
displays, meaning that a 2-second pause will
occur at that point in the dialing sequence.
4. Enter the number to be sent after the pause
and then press to dial the first number.
5. For a hard pause, press again at the
prompt to send the additional number after
connecting.
If you enter the number using a 2-second
pause(s), the phone sends the number that
follows the pause two seconds after the
connection.
Call functions
33
Adjusting the volume during a call
During a call, if you want to adjust the voice
volume, use the Volume keys on the left side of
the phone.
Press to increase the volume level and to
decrease the level. The image on the display
shows all eight levels; the more bars you see, the
higher the level is.
In Standby mode, you can also adjust the keypad
tone volume using these keys.
