- English
Additional Information
!
Certain HDMI output resolutions may not work,
depending on your TV.
!
You must have an HDMI connection to enjoy
videos with 3D technology.
!
A long HDMI cable may cause screen noise. If this
occurs, set to in the menu.
!
For some 3D discs, to stop a movie during 3D
playback, press the
5
button once. The movie
stops and the 3D mode option is de-activated.
To change a 3D option selection when you are
playing a 3D movie, press the
5
button once. The
Blu-ray menu appears. Press the
5
button again,
then select in the Blu-ray menu.
!
Depending on the content and the position of the
picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
!
Depending on the disc type, some aspect ratios
may not be available.
!
If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
!
If you select , your TV may display
(black bars on the sides of the picture).
!
When is on, the setting
automatically defaults to BD Wise and BD Wise
appears in the menu.
!
If the product is connected to a device that does
not support , you cannot use the
function.
!
For proper operation of , set the
option in both the product and the TV to .
!
Be sure to select the correct or you
will hear no sound or just loud noise.
!
If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
!
Regular DVDs do not have BONUSVIEW audio and
Navigation Sound Effects.
!
Some Blu-ray Discs do not have BONUSVIEW audio
and Navigation Sound Effects.
!
This setup does not affect the
analog (L/R) audio or HDMI audio output to your
TV.
It affects the optical and HDMI audio output when
your product is connected to an AV receiver.
!
If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your
selections (PCM or Bitstream).
!
can be activated when
is set to .
!
The Internet connection may be restricted while
you are using BD-LIVE contents.
!
Depending on your TV, certain HDMI output
resolutions may not work. Please refer to the user
manual of your TV.
!
This function is not available if the HDMI cable
does not support CEC.
!
If your Samsung TV has an Anynet+ logo, then it
supports the Anynet+ function.
!
In the external memory mode, disc playback may
be stopped if you disconnect the USB device in the
middle of playback.
!
Only those USB devices formatted in the FAT file
system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support
the USB 2.0 protocol with 4 MB/sec or faster
read/write speeds.
!
The Play function may not work after you
format the storage device.
!
The total memory available to
may differ, depending on conditions.
!
When is set to , audio
is produced by the TV speakers.
Appendix
