24
Press Options soft key, highlight New call and press the
Select soft key or the key. Once connected, both calls
display on the screen.
Note:
The caller currently on hold displays as greyed text on the screen.
When you are engaged in an active call and also have a call on
hold, you may switch between the two calls. Switching calls
automatically places the second call on hold.
To switch between the two calls:
1. Press Options soft key. Use the Navigation keys to
highlight Swap and press the Select soft key or the
key.
•
The current call (caller #2) is placed on hold and the previous call
on hold (caller #1) is reactivated so you can continue conversing
with that person.
2. Press the key to end the currently active call.
To end a specific call:
1. Press the Options soft key. Press End Active Call or
End Held Call and press the Select soft key or the
key.
To end all calls:
2. Press the Options soft key. Press End All Calls to end
all calls.
– or –
Press the key.
In-Call Options
During a call, press the Options soft key to access the following:
•
Speaker on/off
: Turns the speaker phone on or off.
•
Hold
: Places the current call on hold.
•
Contacts
: Allows you to access your Contacts.
•
Noise Suppression on/off
: Turns the Noise Suppression feature on or
off. Use this feature to help suppress background noise.
Note:
Noise Suppression is turned on in a voice call by default. If speaker,
wired head set or Bluetooth headset is used, Noise Suppression will be
turned off. Noise Suppression will need to be re-enabled in subsequent
voice calls. To re-enable in a call, press
Options
Noise Suppression
on
.
•
New Call
: Places the current call on hold and then allows you to enter
and dial another number.
•
Send Message
: Allows you to create and send a new Text message or
Multimedia Message.
•
More
: allows you to select one of the following options:
