Operating Manual
7
Replacement parts
Part Figure Order
Oil Drain Cap (qty. 6) 1 40572
Oil Drain Kit
(includes cap and drain) 2 48116
Module Cover Kit 3 15337
(includes items 1, 2, 4, 5)
Oil Fill Cap 4 15371
(includes item 6)
Intake “Tee” Fitting
(includes caps) 7 15495
Intake Cap (Acme) 8 15330
Intake Cap (1/4" flare - qty. 6) 9 41139
Vent Bolt (includes O-rings) 10 15338
Power Cord and Switch Assembly 11 15366
Motor 12 15665
Coupling 13 48103
Iso-Valve
TM
Assembly 14 15368
Base and Foot Assembly 15 15369
Replacement Module 16 15547
(includes items 1–9 & 14)
Seal Replacement Kit (not shown) 15367
Warranty coverage
Robinair CoolTech® vacuum pumps are war-
ranted against defects in material and workman-
ship for one year of normal use from the date of
purchase. See your distributor for warranty
details.
Out of warranty
A pump which is no longer covered by the one-
year warranty period and which fails to operate
properly should be returned to the distributor with
a full written explanation of the problem. The
distributor may suggest returning the pump to the
factory. Before returning an out-of-warranty
pump, review all maintenance procedures to
avoid an unnecessary return. Replacement parts
are available for doing your own service.
INST0001
4
3
2
1
7
6
5
10
11
12
9
8
13
14
NOTICE: Airborne Noise Emissions
This equipment has been tested for airborne noise emission per
the Council Directive for Machinery (89/392/EEC) Section 1.7.4
Instructions — Essential Health and Safety Requirements.
Sound levels do not exceed 80dB(A) actual value.
15
16
