RobinAir 15310 Manual

next previous

 CAP (Model 15310 or 15510) or EXHAUST



oil until the oil appears at the bottom of the sight glass.



refer to Pump Specications in this manual.

 









 

is allowed to collect in oil, you may need to remove the oil reservoir

cover and wipe it out.

b) Another method of dealing with heavily contaminated oil is to force

the oil from the pump reservoir. To do this, allow the pump to run

until it is warmed up. While the pump is still running, remove the oil

drain cap. Slightly restrict the exhaust. This will back-pressure the oil

reservoir and force the oil from it, carrying more contaminants. When



Repeat this procedure as required until the contamination is removed.



appears at the bottom of the sight glass.

 

cleaners that contain degreasing agents.

 

grounding reduces the risk of electrical shock by providing an escape

wire for the electric current. This product is equipped with a power cord

having a grounding wire with an appropriate grounding plug. The outlet

used must be correctly installed and grounded according to local codes

and ordinances.

WARNING : Incorrect installation of the grounding plug

will result in electrical shock. When repair or replacement

of the power cord or plug is required, do NOT connect the

grounding wire to either at blade terminal. The wire with

green insulation (with or without yellow stripes) is the

grounding wire.

Cleaning

the Pump

Oil

Change

Procedure

contd.

Grounding

Instructions