Paper and Other Media
9
• Paper Feed Unit (Tray 2/3): approximately 7.17 - 11.69 inches in width,
and 6.3 - 17.01 inches in length.
•
The size is not supported.
❖ Paper weight and number of sheets to be set
❒ Check that the top of the stack is not higher than the limit mark inside the
tray.
❒ The envelope feeder unit requires the installation of the optional paper feed
unit.
❖ Paper size not supported by both side printing
The following paper sizes cannot be printed on both sides:
• Metric version: A5K, A6K, 5
1
/
2
× 8
1
/
2
K, Executive (184 × 246)K,
Com#10 Env (104.8 × 241.3)K, C5 Env (162 ×229)K, C6 Env (114
×162)K, DL Env (110 × 220)K, Monarch Env(98.4 × 190.5)K.
Custom Size supported by approximately 182 to 297 mm in width, and ap-
proximately 148 to 432 mm in length.
• Inch version: A5K, A6K, 5
1
/
2
× 8
1
/
2
K, Executive (7
1
/
4
× 10
1
/
2
)K, Com#10
Env (4
1
/
8
× 9
1
/
2
)K, C5 Env (6.38 × 9.02)K, C6 Env (4.49 × 6.38)K, DL
Env (4.33 × 8.66)K, Monarch Env (3
7
/
8
× 7
1
/
2
)K.
Custom Size supported by approximately 7.18 - 11.68 inches in width, and
approximately 5.83 - 17.00 inches in length.
Supported paper weight
Maximum number of
sheets (plain paper)
Tray 1
60 - 105 g/m
2
(16 - 28 lb.) 500 (80 g/m
2
, 20 lb.)
Bypass Tray
52 - 162 g/m
2
(14 - 43 lb.) 100 (80 g/m
2
, 20 lb.)
For other kind of papers,
see p.25 “
Loading Paper
in the Bypass Tray”.
Paper Feed Unit (Tray 2, Tray 3)
60 - 105 g/m
2
(16 - 28 lb.) 500 (80 g/m
2
, 20 lb.)
Envelope Feeder Type 2600 See p.32 “
Loading Envelopes”.
