TROUBLESHOOTING
5-24
Table 5-5. Startup status messages (continued)
NIC resetting
Do not turn off
The Network Interface Card (NIC) is
completing download of new NIC
firmware.
Do not turn off the printer while
this message displays.
Formatting Disk The printer is formatting the Hard Disk.
This message displays only when you
install a new Hard Disk.
This message is informational
only. No action is required.
Table 5-6 lists Control Panel messages that appear during normal printer
operation.
Table 5-6. Operational status messages
Message Description Action
Ready The machine is ready for data input. This message is informational
only. No action is required.
Waiting The machine is waiting for additional
data.
This message is informational
only. No action is required.
Processing Data is being processed. This message is informational
only. No action is required.
Printing The machine finished processing the
data and is printing the job.
This message is informational
only. No action is required.
Table 5-7 lists the Control Panel messages that appear when consumables
need replenishing.
Table 5-7. Consumable messages
Message Description Action
Load <paper size> The machine is out of the specified
paper.
Place the specified paper in any
input tray. Make sure to adjust
the paper size selection dial, if
necessary.
You can force the printer to use
the default tray, ignoring the
paper size, by pressing the
[Esc.] key.
