General Features
87
3
❖ Original Type Display
You can have the original types shown on the initial display.
The default setting is Display.
❖ Tone: Original Remains
The beeper (key tone) sounds if you forget to remove originals after copying.
The default setting is On.
If Panel Key Sound of User Tools (System Settings) is [Off] the beeper does not
sound irrespective of the Tone: Original remains setting.
❖ Job End Call
You can choose whether or not the beeper sounds when copying is complete.
If Panel Key Sound of User Tools (System Settings) settings is [On], the ma-
chine beeps to notify you that it did not complete a job for reasons such as
copying was interrupted, the paper tray ran out of paper, or a paper jam oc-
curred.
The default setting is On.
❖ Connect Copy Key Display
You can specify whether or not to display the key for Connect Copy.
The default setting is On.
❖ Switch Original Counter Display
You can select the original counter display.
The default setting is Original Sheet Counter.
❖ Customize Function: Copier
You can assign up to six frequently-used functions to Copy Function keys.
The default setting for “Customize Function: Copier 1” is 1 sided→2 sid-
ed:TtoT.
The default setting for “Customize Function: Copier 2” is 2 sided→2 sided.
The default setting for “Customize Function: Copier 3” is
1 sided
→
Comb 2 orig
.
The default setting for “Customize Function: Copier 4” is
1 sided
→
Comb 4 orig
.
The default setting for “Customize Function: Copier 5” is Create Margin.
The default setting for “Customize Function: Copier 6” has not been set.
