3
66
Shooting
6 Press E.
The screen of Step 2 reappears.
7 Press E.
The camera returns to standby mode.
8 Shoot.
When [Start Interval] is set to [Now], the first picture is taken.
When set to [Set Time], shooting starts at the set time.
To cancel shooting, press F in standby mode.
After the specified number of shots are taken, the camera
returns to standby mode in Step 7.
t Memo
• When [Save Process] is set to Z, a new folder is created and
the composite image is saved there. When shooting in
another drive mode after performing Interval Composite,
another new folder is created.
• Mount the camera on a tripod during shooting.
In C mode, you can use [Interval Movie Record] to take still
pictures at a set interval from a set time and save them as a
single movie file (Motion JPEG, file extension: .AVI).
1 Turn the main switch to C and press D.
The Drive Mode screen appears.
2 Select q and press B.
3 Use CD to select q, r, or s.
Proceed to Step 7 if you do not need to change the shooting
conditions.
4 Press G.
5 Set the shooting
conditions.
Interval Select from 2 seconds to 24 hours.
Standby Interval
Select from the minimum time or 1
second to 24 hours.
Number of Shots Select from 2 to 2000 times.
Start Interval
Select whether to take the first picture
now or at a set time.
Start Time
Set the shooting start time when
[Start Interval] is set to [Set Time].
Composite Mode
Select from [Average], [Additive], or
[Bright].
Save Process
Select Z to save images in the
middle of processing.
Self-timer/
Remote Control
Select the operation mode.
Interval Movie Record
r Records a movie with the self-timer.
s Records a movie with remote control.
0008
00
:
00´02˝
Interval Movie Record
Cancel
Parameter Adj.
Interval
Number of Shots
OK
times
00
:
00´02˝00
:
00´02˝
00080008
––
:
––––
:
––
Interval Movie RecordInterval Movie Record
IntervalInterval
Recorded PixelsRecorded Pixels
NowNow
Start IntervalStart Interval
Start TimeStart Time
Number of ShotsNumber of Shots timestimes
CancelCancel OKOK
