Note: ❐ To switch the Confidential File Report on or off, use Function 81 (see
page 128).
❐ To switch the Error Report on or off, contact a service technician.
❐
Printing a Sample of Data on the Reports
For reference purposes, the machine prints the first few inches of the fax
message on the following reports.
❐ Transmission Result Report
❐ Memory Storage Report
❐ Polling Clear Report
❐ Communication Failure Report
❐ Transfer Result Report
❐ Transmission Deadline Report
❐ Polling Confirmation List
The procedure to switch this feature on or off is as follows. (See page 10 if you
need more information about the User Parameter settings adjustment procedure).
1.
Function 6 0 2 2 2 2 9 1
2. The settings for switch 00 are now
shown on the bottom line of the display.
3. Press
↓ until the settings for switch 03
are shown.
The setting you need to use is digit 0.
4. If you wish to change the setting, press
0 .
5. Finish:
Yes Function
USER PARAMETER PRINT LIST
DEFAULT: 01000000
SWITCH00: 01000000
YES
TO END
Digit 0
0: This feature is Off.
1: This feature is On.
You may program one of the User Function Keys to
switch the Memory Storage Report on/off. Use
Function 35; see page 163 to see how to do this.
AUTOMATICALLY PRINTED REPORTS REPORTS
188
