Troubleshooting
78
6
A Open the front cover by pushing
the front cover release button.
B If the paper is in the front side of
the photoconductor unit, careful-
ly pull it out.
Note
❒
When removing misfed paper,
be careful not to touch the fus-
ing section because it could be
very hot.
C When the misfed paper is in the
main section of the photoconduc-
tor unit, turn the dial downward
then remove the misfed paper in
the printer.
Make sure that you do not leave
any misfed paper in the printer.
Note
❒
If it is difficult to turn the dial,
turn it slightly upward in the
opposite direction, and then try
again.
D Close the front cover.
When the Message "Remove
Misfeed From Output Tray "
Appears
CAUTION:
A Open the paper exit cover.
Note
❒
When opening the paper exit
cover, be careful as it may be
hot.
TFWX080E
TFWX210E
•
When removing misfed paper,
do not touch the fusing section
because it could be very hot.
TFWX220E
TFWX230E
