Getting Started
18
1
30. Quick Dial Flip Plate
Tilt the plate downward to change from
{Quick Dial 01} key to {Quick Dial 16} key.
Tilt the plate upward to change from
{Quick Dial 17} key to {Quick Dial 32} key.
31. {Job Information} key (scanner
and facsimile mode)
Press to obtain status information on
transmitted data.
32. {On Hook Dial} key (facsimile
mode)
Press this to hear dial and data tones on
the fax line while dialing, as if the hand-
set were off the hook. For details, see “On
Hook Dial”, Facsimile Reference.
33. {Pause/Redial} key (facsimile
mode)
• Pause: Press to insert a pause in a fax
dialing sequence. You cannot insert a
pause at the beginning of a sequence.
The pause is indicated by “-”. For de-
tails, see “Entering a pause”, Facsimile
Reference.
• Redial: Press this to select a recently-
dialed destination. For details, see
“Redial”, Facsimile Reference.
34. {Memory Trans} key (facsimile
mode)
Press to carry out memory transmission.
See “Memory Transmission”, Facsimile
Reference.
35. {Resolution} key (facsimile
mode)
Press to specify the resolution of the fax.
See “Resolution”, Facsimile Reference.
36. User Function keys (facsimile
mode)
You can assign frequently-used functions
to these keys. See “General Settings/Ad-
just”, General Settings Guide.
By default, the following functions are
registered:
{F1} key: Start manual reception
{F2} key: Switch reception mode
{F3} key: Transmission stamp
Reference
p.19 “Display”
p.24 “Turning On the Power”
p.29 “Entering Text”
