52
Put the toner cassette in a vinyl
bag.
m :
To prevent the toner from
spilling out, make sure you seal the vinyl
bag firmly.
Remove the two shipping thumb-
screws from inside the copier.
(Only short thumbscrew with type
1 model.)
Close the top unit by pressing
down firmly on the marked posi-
tion.
Attention: Make sure to press the marked
position.
Remove the sticker and insert the
two shipping thumbscrews into the
holes, then tighten them as shown.
(Only short thumbscrew with type
1 model.)
l
Make sure to insert the shipping
thumbscrews to prevent damage while
moving the copier.
Remove copy tray as shown.
First, gently lift it up
0 ,
then pull
it out
0.
Put the copier in the vinyl bag.
