NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-305-238-4373
11
INSTALLATION (continued)
STEP 4 – MOUNTING A MICROFLASHER TO A/V COMPONENTS
components. Locate a place for the remote control that is within arm’s length of the A/V compo-
the remote control (Figure 6).
front panel. Press buttons on the remote control while watching the front panel of the A/V compo-
nent. When the component responds repeatedly to the commands, peel off the protective backing
If the A/V component’s remote sensor is not clearly
-
dow of the A/V component while pushing buttons on
the remote control until you get a response (Figure 7).
Repeat this procedure for each A/V component you
wish to control.
When the A/V component responds repeatedly, peel off
Figure 6: Locating IR
