Using Your TV and Remote
With a Cable Box: Setting the Cable Channel
13
The Cable Channel works with DSS•CABLE button on the remote. If the
Cable Channel is set, pressing DSS•CABLE selects the channel to see
cable channels. The Cable Channel setting depends on which channel
your cable box must be on to see cable channels. The channels usually
used are 02, 03, 04, 05 or 06. Consult your cable company for more information.
A. Press TV to set the remote to
control the TV.
B. Press MENU•PROG to select the
Setup menu. This menu is
white.
A. Press MOVE ̄ to move down
the menu until Cable Channel is
highlighted.
B. Press MOVE ̈ to underline the
item.
Enter the number for your cable
box, either 02, 03, 04, 05, or 06.
Press MOVE ̆ or ̄ until
“Disabled” is displayed to turn
this feature off.
1. Select the Setup menu
2. Highlight Cable Channel
3. Enter channel number
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label: 13 clear
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: 00
Cable Channel: Disabled
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label: 13 clear
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: 00
Cable Channel: 03
13
Controls Alarm Adjust Setup
English
Français Español
Autoprogram
Label: 13 clear
Channel Memory: 13 Stored
Cable/Air: Cable
