6. Placing the WearLink belt and
transmitter
Place the WearLink belt as indicated, with the
transmitter pocket on the left side of the horse.
By doing so, you ensure the electrodes of the
belt are in the right position.
Clip the transmitter to its contact points, as indi-
cated.
Then close the pocket by using the velcro
straps.
This pocket protects your transmitter from
shocks and scratches and prevent it from falling
off the belt.
The range of the WearLink transmitter is over
10m, therefore you can follow your horse’s heart
rate when working with a leash.
Using contact gel on the
electrodes of the WearLink
belt is highly recommended. It
ensures a better detection of
the horse’s heart rate.
The hypo-allergenic and
chloride-free electrode gels
ensure a better conductivity.
Non-thinning formula will not
break down or irritate after
lengthy contact.
Here is an example of con-
ductive gel recommended by
the biggest electrodes manu-
facturers, to be used on
multifunctional electrodes.
The gel should be placed on the electrodes
located at the back of the WearLink transmitter.
Put a "dab" of gel on the top electrode...
... And on the bottom electrode (under the
transmitter pocket).
You can now install the sulky, your WearLink belt
and transmitter are now ready for use!
7. Starting training
You are now ready to start. Starting from the
time display, press OK twice.
The stopwatch starts, a heart symbol blinks
and the horse’s heart rate is displayed in the
bottom of the screen. From now on, the
CS600X is recording your exercise.
Each display shows 3 rows of data and is named
after the bottom row.
To check the data you are most interested in,
change display by pressing UP or DOWN. (6 differ-
ent displays are set by default but can be custom-
ized – see user manual)
You can also zoom on a data to make it larger on
the display.
Press and hold UP for 2 seconds to zoom in the
data of the top row, or DOWN for 2 seconds to
zoom in the data of the bottom row. Press and
hold the same button for 2 seconds to zoom out.
To stop the exercise, press STOP twice. The
CS600X returns to time display.
All the data has been recorded and can be re-
trieved in the file. To access the file, press UP
once from time display and then validate by
pressing OK.
For more detailed information on how the CS600X
Trotting works, please check the user manual in-
cluded in the box.
For more tips of use, training advices and more in-
formation on Polar Equine products, visit
www.polar-equine.com
For more information on Polar products, visit
www.polar.fi
Enjoy your ride!
