A SERVICE OF

logo

5
C
5 Insert the stopper into the opening in the lid. When finished,
make sure that the sieve of the lid is positioned in the spout
to pour liquids.
C
6 Always make sure that you remove the blender jar from
motor unit with the blade unit still attached to the jar. Never
touch the blades of the blade unit while the appliance is
connected to the power source.
To disassemble the blender, follow steps in reverse order.
Using the Blender
1 Place the Philips Blender on a flat, dry,clean surface. Rubber
feet will grip typical countertops to prevent walking.
NOTE:
Make sure that the appliance is plugged in and the
blender jar has been properly locked in place before you switch
the appliance on.
2 Plug cord into 120V AC electrical outlet.
C
3 Select the speed that is most suitable for the ingredients you
want to process:
1 light processing of mainly liquid ingredients,e.g.
chocolate milk
2 heavier processing of a combination of liquid and
solid ingredients
3 heavy processing of mainly solid ingredients
If you are not sure which speed to select, you can always use the
highest speed (speed 3).
C
4 For quick processing needing only a few moments at a time,
press the M button and then release it immediately.
You may also press the M button to get a momentary power burst while
blender is operating on any of the other speeds. Once you release the M
button the blender automatically stops.
NOTE:
Do not press the M button for longer than a few
seconds at a time.