14
MACINTOSH
Viewing Images on a Macintosh
You can use the provided USB cable (I-USB2) or a card reader to send
your images to the PC, and you can edit and print your images using
the image viewing software. Here, the method for viewing images with
the provided software (S-SW8) is explained.
The following software is included in the CD-ROM provided.
• USB driver
• Image viewing software (ACDSee™)
• OS: Mac OS 8.6 or higher (requires QuickTime 4.0 or higher)
• CPU: PowerPC 266MHz or higher
• Memory: 8MB minimum
• Hard Disk space: 6MB minimum
• USB port must be standard equipment
Install the required software as follows.
1 Turn on your Macintosh.
2 Place the provided CD-ROM (S-SW8) in your Macintosh
CD-ROM drive.
3 Double-click the CD-ROM (S-SW8) icon.
4 Double-click the [Install ACDSee™] icon.
5 Double-click the [Master Installer] alias icon.
The [PENTAX Software Installer] screen will appear.
Software Provided
System Requirements
We recommend using the AC Adapter D-AC5 when connecting your
camera to your PC. Your image data could be corrupted if your
batteries run out during image transfer.
Installing the Software
