To exit an option without changing the setting, press e.
Ribbon
You have to tell the printer if your supplies require a ribbon. To
change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press L or R until you see
SUPPLY
Ribbon r
2. Press E to set the ribbon option. You will see the current
setting, for example:
RIBBON
l Yes r
3. Press L or R to see the other options. After you display the
option you want, press E. Press e twice to exit to the
Main menu.
If you set the Ribbon option to Yes, install a
ribbon before printing.
Batch Separators
A batch separator is an extra tag with a pinstripe pattern. It is
printed between batches to make batches easier to find. If you
select "Long" for the separator, a double-length (two tags)
separator prints.
2-2 Setting Supply Options
