Do
not
drop
or
strike
the
3D
Conversion
Lens
when
carrying
it.
Also,
be careful
not
to
apply
strong
force
to
the
3D
Conversion
Lens.
• Be careful that no shock is applied to the 3D
Conversion Lens by dropping or striking the bag with
the 3D Conversion Lens stored within. It may cause a
malfunction or stop images from being recorded.
It
may also damage the 3D Conversion Lens.
• Do not carry the video camera with the 3D
Conversion Lens attached by holding onto the 3D
Conversion Lens only.
4
VQT3A68(ENG)
Do
not
use
or
store
the
3D
Conversion
Lens in the
following
places
since
it
may
cause
a failure
or
malfunction.
-
In
direct sunlight or at the beach
in
summer, etc.
- Areas with high temperature and/or humidity, or
where there
is
rapid change
in
temperature and/or
humidity
- Areas with a lot of sand and dust
- Areas close to fire
- Close to air-conditioners and/or humidifiers
- Areas where it may get wet
- Areas with vibration
- inside a car
•
Do
not disassem ble or modify.
• When the 3D Conversion Lens has not been used for
a long period of time, check to see if there is any
looseness
in
the attachment of the 3D Conversion
Lens and adjust the attachment position before use.
• When not
in
use, put the lens caps on, place
it
inside
the lens storage bag, and store
in
a place with low
humidity.
(-+ 13)
• Also read the operating instructions
of
the video
camera.
