A SERVICE OF

logo

2.8.6 After Site Survey
After obtaining the
proper measurement results, exit Radio Signal Test mode before connecting the CS to the
PBX.
1. Hold down the POWER button on the PS until the PS is turned OFF.
2. Disconnect the CS from the AC adaptor/battery box or the CSIF/DLC/DHLC card to stop supplying
electricity.
KX-TDA0158CE
KX-TDA0141CE/KX-TDA0142CE
3. Switch all DIP switches on the CS from ON to OFF.
KX-TDA0158CE
6
5
4
3
2
1
ON OFF
KX-TDA0141CE/KX-TDA0142CE
1
2
3
4
5
6
OFF ON
168 Installation Manual
2.8.6 After Site Survey