A SERVICE OF

logo

5
SAFETY SIGN LOCATIONS
ITEM QTY PART # DESCRIPTION
1 1 50-10017 READ MANUAL
2 1 50-0725 HYDRAULIC
3 2 50-0737 PINCH POINT
4 1 RDL3113 DANGER
BACKHOE
5 1 RDL3154 PORT RELIEF
6 1 50-0740 TAG-MISUSE
INSTRUCTIONS
x Keep all safety signs clean and legible.
x Replace all missing, illegible, or damaged
safety signs.
x Replacement parts for parts with safety signs
attached must also have safety signs
attached.
x Safety signs are available free of charge from
your dealer or from FFC.
PLACEMENT OR REPLACEMENT OF
SAFETY SIGNS
1. Clean the area of application with non-flammable
solvent, then wash the same area with soap and
water.
2. Allow the surface to fully dry.
3. Remove the backing from the safety sign, exposing
the adhesive surface.
4. Apply the safety sign to the position shown in the
diagram above and smooth out any bubbles.
ITEM 1
ITEM 2 ITEM 3 ITEM 4
ITEM 6
ITEM 5