Menu functions> 73
C
OLOUR
MENU
The printer automatically adjusts colour balance and density at
appropriate intervals, optimising the printed output for bright
white paper viewed in natural daylight conditions. The items on
this menu provide a means of changing the default settings for
special or particularly difficult print jobs. Settings revert to their
default values when the next print job is complete.
ITEM SETTINGS EXPLANATION
ADJUST DENSITY EXECUTE Image density will be automatically
adjusted at power on, when a new image
drum or toner cartridge is installed, and at
intervals of 100, 300 and 500 drum
counts. If a 500 drum count interval
occurs during a print job it will occur at
the end of that job, and will take up to 55
seconds.
DENSITY
CONTROL
AUTO
MANUAL
Selecting this will permit automatic
adjustment of the colour density.
AUTO COLOR
REGISTRATION
EXECUTE Performs automatic colour registration
adjustment. Normally this is done on
power on and when the top cover is
opened and then closed. This process
accurately aligns the cyan, magenta and
yellow images to the black image.
C REG FINE ADJ
M REG FINE ADJ
Y REG FINE ADJ
-3~0~+3
-3~0~+3
-3~0~+3
Performs fine adjustment of image timing
in relation to the black image component.
