(Revised 2010-7-2) page 139 of 145
Broadcast Packet Count Limit Commands
Get the Broadcast Packet Count Limit for one port
Displays the broadcast packet percentage for a particular port.
broadcast get percentage <port-number>
port-number
The port number must range between 1 and the maximum port number
in the switch.
N-TRON/Admin#[1]> broadcast get percentage 6
The BPCL for port number 6 is : 100
Get the Broadcast Packet Count Limit for all ports
broadcast show percentage
Displays the broadcast packet percentage for all ports.
broadcast show percentage
N-TRON/Admin#[1]> broadcast show percentage
Broadcast Percentage Value for Ports
Port # 1 : 100 Port # 14 : 100
Port # 2 : 100 Port # 15 : 100
Port # 3 : 100 Port # 16 : 100
Port # 4 : 100 Port # 17 : 100
Port # 5 : 100 Port # 18 : 100
Port # 6 : 100 Port # 19 : 100
Port # 7 : 100 Port # 20 : 100
Port # 8 : 100 Port # 21 : 100
Port # 9 : 100 Port # 22 : 100
Port # 10 : 100 Port # 23 : 100
Port # 11 : 100 Port # 24 : 100
Port # 12 : 100 Port # 25 : 100
Port # 13 : 100 Port # 26 : 100
These are egress filters.
Set the Broadcast Packet Count Limit
Sets the broadcast packet percentage for a particular port
broadcast set percentage <port-number> <%>
port-number
The port number must range between 1 and the maximum port number
in the switch.
%
The count limit should be in the range 0 to 100 and represents the
percentage.
N-TRON/Admin#[1]> broadcast set percentage 4 100
