A SERVICE OF

logo

Maintenance 6-5
Part 7119745C
E 2007 Nordson Corporation
MiniCure 08-07
Fuses & electrical equipment
The main electrical equipment on the MiniCure can be found in the lower
cabinet. This is where the circuit fuses and relays are. The fuses can be
accessed by removing the control panel, but if other maintenance is
required the conveyor assembly can be removed from the lower cabinet.
W ARNING: Only qualified personnel should access the electrical
equipment of the MiniCure.
Ensure the ’System Isolator’ is in the OFF position.
Remove the Hood assembly.
Release the two Lamp supply cables and feed them down through the
rubber grommets into the lower cabinet.
Remove the control panel by removing the 4 x M8 hexagon key bolts.
FIG. NUV7A
2
1
Figure 6-6
1. Control Panel Screws 2. 4 x M8 Hexagon Key Bolts