Synchronization in continuous shooting in Manual
ƒ
mode.
The SB-28 is able to recycle fast enough to synchronize with a motor-driven
camera firing continuously up to six frames per sec. at a 1/64 flash output
level. It is possible to take up to 40 flash pictures in rapid succession.
*Available in the European market only.
• SD-7 uses C-type alkaline-manganese batteries.
• Because the European version of the SB-28 comes with a different shaped
connector, Nikon DC Units SD-7, SD-8 and the Power Bracket Unit SK-6 are not
compatible.
• Fresh and same type batteries must be used in both the SB-28 and optional Nikon
DC Units SD-8/8A*, and Power Bracket Unit SK-6/6A*.
Allow the SB-28 to cool off for at least 10 minutes after the maximum
number of continuous firing shown in the table.
Even if the number of continuous firings is less than those listed
above, it’s a good idea to let the SB-28 cool off as often as possible
when using it in a warm environment.
48
Manual Flash
ƒ
Mode
t, ˙, " , and ƒ 1/1 and 1/2
ƒ 1/4, 1/8, 1/16, 1/32, 1/64
Flash mode and output
15
40
Max. number of continuous firings
