Using the EISA Configuration Utility
5-18 Using the System Utilities
PCI 1 - PCI Raid Controller
PCIFunction1..................Enabled
PCI 2 - PCI Ethernet Controller
PCIFunction1..................Enabled
Auto-Added
Auto-Added
Auto-Added
Auto-Added
Embedded - PCI SCSI Controller
PCIFunction1..................Enabled
Embedded - PCI VGA Controller
PCIFunction1..................Enabled
Standard VGA Resources . . . . . . . . . . . . Enabled
Edit = ENTER
<Edit Resources = F6>
<Advanced = F7>
<Done = F10>
Press and to see all information.
Press F10 when you have finished this step.
Press F6 to edit its resources (IRQs, DMAs, I/O ports, or memory).
Press ENTER to edit the functions of the highlighted item.
Note: The configuration data shown in Figure 5-8 depends on your CFG file
and may not be identical to the one on your screen.
