19
Product Operation
Before You Start
Check the following before you start the RYDIS H65.
1
Be careful not to break the RYDIS H65 when you pull the RYDIS H65 out of the box.
For information of installing the RYDIS H65, see page 13.
2
Check the location (L/R) of the brushes and install them.
For information on installing the brushes, see page 14.
3
Pull the RYDIS H65 out and manually charge it fully rst.
When you start the RYDIS H65 for the rst time, it may not work, as the battery has probably been
discharged. For information on manual charging, see page 17.
4
Remove any obstacles on the oor.
Remove small objects, clothes, and fragile objects from the oor before cleaning. Fold up lengthy carpet/rug
tassels or keep the RYDIS H65 away from them.
5
If the dust bin is full, the cleaning performance will be reduced. Emptying the dust bin frequently is highly
recommended.
For information on cleaning the dust bin, see page 27.
6
If there is anything on cli detection sensors or wheels, remove it.
This may cause failure or malfunction of the RYDIS H65. For information on cleaning cli detection
sensors and wheels, see page 29.
7
Children and seniors may be surprised at the sight of the RYDIS H65 in operation.
Please let children and seniors know about the operation of the RYDIS H65.
8
Be careful not to drop the RYDIS H65 from a high place.
Do not use the RYDIS H65 on a narrow or a high place such as a desk, table, etc. If shoes are placed side by side at the
entrance to the living room, the RYDIS H65 may recognize them as the oor, which may cause falling.
9
After charging is complete, keep the RYDIS H65 docked in the charging station, or turn the system power
switch o which is located on the rear side of the RYDIS H65.
