A SERVICE OF

logo

Open as PDF
next previous
4. Maintenance
29
(4)Replacing the surface illumination bulb
㩷
CAUTION㩷
The bulb remains hot after it has been turned off. Do not replace the bulb until it has cooled down.
1. Turn off the surface illumination switch and power switch.
2. Turn the white filter counterclockwise to remove it.
3. Remove the bulb by turning it counterclockwise with the supplied bulb setter. Mount a new bulb
using the bulb setter.
4. Switch the illuminator select switch knob to the surface illumination.
5. Check that the bulb lights.
6. Turn on the power switch and surface illumination switch. Check that the bulb lights.
7. Replace the white filter.
4.3 Consumable Parts
Order No. Name
380405 Stage glass 96x96 (for TM-505/505R)
380495 Stage glass 154x96 (for TM-510/510R)
512555 Vinyl cover
383038 Illumination bulb (24V)
350279 Fuse (1A) for other than CE
384204 Fuse (1A) for CE
380240 Leaf spring