Mitel 5330/5340 IP Phones - User Guide
Answer a call
Do one of the following:
• Lift the cordless handset.
• If the handset is already out of the cradle, press the hookswitch button on the handset.
Hang up
Do one of the following:
• Replace the cordless handset in the cradle.
• Press the hookswitch button on the handset.
Dialing – Auto Dial Disabled
To dial a number with Auto Dial disabled:
1. Lift the handset or press the hookswitch.
2. Make the call using the dial pad, or press a programmed speed dial key on the phone.
Dialing – Auto Dial Enabled
To dial with Auto Dial enabled:
• To dial the predefined Auto Dial number, press the hookswitch on the cordless handset
or headset.
To program Auto Dial, refer to “Using the Cordless Devices Application” on page 46.
Alerting Tones and LEDs
The cordless accessories provide the following alerting tones:
Feature Function
Mute key on cordless device ON/OFF 2-pitch tone occurs immediately. Reminder tone
occurs 30 seconds after activation and then
regularly until deactivated.
Mute key on Phone ON/OFF
No immediate tone. Reminder tone occurs 30
seconds after activation and then regularly until
deactivated.
Low battery (within 10 minutes left) 3 beeps and 20 second pause repeated 3 times
Low battery (within 2 minutes left) 3 rapid beeps and 1.5 second pause repeated 3
times
Out of range Repetitive 3-pitch tone until you are back in range.
The call remains established if you return within
range within 10 seconds; otherwise the call is
dropped.
Note: Audio indications are heard in the handset only when it is in use.
41
