Auxiliary, normal and high-speed
burners
^ Place the burner head b on to the
burner base e so that the ignition
safety device c and the ignitor d
extend through their respective holes
in the burner head. The burner head
must click into place correctly.
^
Place burner cap a flat over burner
head b.
When correctly positioned it will not
slide about.
To assemble the double-insert super
burner
^ Place burner head c onto burner
base d so that the ignition safety
device e and the ignitor f extend
through their respective holes in the
burner head. The burner head must
click into place correctly.
^
Place the burner caps a and b in
position.
Important: replace parts in the correct
order after cleaning.
Cleaning and care
20
