page 7
www.midlandusa.com
English François Español
WR-120 Owner’s Manual
Reviewing Recent Alerts:
The WR-120 All Hazards Weather Alert Radio can store up to 10 different
Weather/Hazard alerts. You can review all alerts still in effect by pressing ▲
to scroll through the active alert memory on your weather radio. A double
beep indicates the end of the list. “NO MESSAGE” will be displayed if no
alerts are active.
Alert Test:
1. Press
MENU
to open menu options.
2. Press ▲ to scroll through menu to ALERT TEST.
3. Press
SELECT
to sound the alert siren.
4. Press
MENU or SNOOZE
to silence the siren then press MENU exit menu
mode.
Note: Ensure ON/OFF switch is in the ON position.
Set Channel/Volume:
1. Press
MENU
to open menu options.
2. Press ▲ to scroll through menu to SET CHANNEL then press
SELECT
.
3. *Tune the channel to the desired broadcast by using ▲ or ▼.
Find the channel for your area by visiting http://www.nws.noaa.gov/nwr/
nwrbro.htm and reviewing the corresponding frequency and channel for
your area using the chart below.
4. **Adjust the volume to a comfortable level by using
VOLUME UP
or
VOLUME DOWN
.
5. Press
MENU
to exit menu mode.
* Press the ► button scan to the next channel available channel
**Ensure ON/OFF switch is in the ON position
Channels Preset on the
Weather Radio
Broadcast Frequency
(MHz)
1 162.400
2 162.425
3 162.450
4 162.475
5 162.500
6 162.525
7 162.550
