60
Press this key on the remote
control....
The screen displays Explanation
NEXTVIEW is an electronic programme magazine for all important
TV stations. It is transmitted by various stations and also contains
the programme information for other stations.
Your TV set will need about 20 minutes to collect the large quanti-
ties of data for the first time.
• A TV set with only one receiver:
- must be left set to the
NEXTVIEW programme position for at
least 20 minutes or
- will collect the data in standby mode during the night, starting
at 2 AM.
• A TV set with two receivers collects the data with the second
receiver while you are watching another programme with the
first receiver (see also the next page).
Once the data have been collected, the TV set stores the program-
me magazine in a special memory, where it is subsequently upda-
ted at regular intervals if the TV set is not switched off with the
main power switch. A TV set with two receivers does this during
normal use, while a TV set with only one receiver does it at night,
in standby mode.
1. Call the menu „Function
keys“
Large subtit.
Pict. format
Stereo/ch. 1-2
Large subtit.
Pict. format
Stereo/ch. 1-2
This menu shows the current settings for the function
keys
The „NEXTVIEW“ function can be assigned only to the
function key C.
For this reason, „NEXTVIEW“ is displayed in the pos-
sible selections only if the C key was pressed before-
hand.
