19
PARTS OF THE MS6130 HAND-HELD BAR CODE SCANNER
Becoming familiar with the features of the MS6130 hand-held scanner will
help when operating one of these scanners. The illustration and list explain
the pertinent parts.
Figure 4: Scanner Parts
Battery Charge Contacts Receptacle for the battery charger.
Reactivation Switch Turns the unit on after a timeout. Press the
button from the bottom.
Green and Red LEDs When the red LED is on, the laser is on. If the
green LED flashes on, the scanner has read a
bar code successfully. Communication to the
host is complete when the receiver beeps.
Infrared Object Sensor When a specified time has elapsed without any
scanning, the unit will enter a “standby” mode.
To reactivate the unit, remove the current
object and present an object in front of the
output window again.
Output Window This aperture emits laser light.
Reactivation
Switch
Output
Infra-red (IR)
Replaceable
Battery Charge
